SenTech STC-SS400 Series Bedienungsanleitung PDF herunterladen (Seite 10)

Sensor Technologies America, Inc.

1345 Valwood Parkway, Suite 320 :: Carrollton, Texas 75006

Phone: (972) 481-9223 :: Fax: (972) 481-9209 :: Toll Free: 1 (877) - SENTECH (736-8324)

www.SentechAmerica.com

STC-400 & STC-400L Series

Operating Manual

Rev. 0.1 - Created July 15,2005

5.1) Camera Board Layout

5.2) Rear Panel

- 12-Pin Connector for Power and Control Signals

Connector for power, external sync signals, and video output. This

connector is usually connected to the power supply, sync signal generator

(or sync source), and video monitor. Please see following page for the 12-

Pin connector’s pin assignments.

- Manual Gain Control Adjustment

When the Gain Select Switch is in the “Manual” mode, this gain of the

video amplifier is adjusted by turning this adjustment. The user can adjust

the gain of the camera from 0 to 25 dB as desired.

- Gain Select Switch (Manual or Fixed)

Manual gain mode is selected by setting this switch to the left. Fixed gain

is selected by setting this switch to the right (factory setting default).

Manual gain value is set by the (B) “Manual Gain Control Adjustment”

(See Above).

- Video Output Connector (BNC)

Video signal output connector for the camera’s composite monochrome signal.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Keine Kommentare

SenTech STC-SS400 Series Bedienungsanleitung Seite 10